Exhibitors

ALTINBİLEK Coolers are designed in suitable structures for pelletizing systems, either single or double-deck. These coolers are industrial machines used to cool compressed hot products coming from pellet mills down to ambient temperature, increase their resistance to breakage and crumbling, reduce their moisture content to a certain extent, and thus improve the conditions for long-term storage.

Flat Bottom Silos deliversity by involving easy assembly resulting in minimal installation costs and highly efficient low cost storage. » BBCA Storex offers a capacity range of 25-20.000 tones » BBCA Storex offers diameter-based roof options that help balance performance with price. Also self-supporting roofs with apporiate angle, permitting the optimization of storage capacity through adaptation to the slope of the silo. » The sheets used in silo manufacturing are made of high-quality structural steel, S350GD quality and 310gr/m² (S350GD+ZM310) Magnelis or PosMac coating. The sheets are resistant to a maximum yield stress of 350Mpa and a breaking stress of 420Mpa. » BBCA Storex uses Grade 8 (10.9 K) bolts and nuts which have JS1000 or other special coating (rust-free in over 1000 hours of salt spray testing. That s up 10 times more corrosion resistance ) also special insulation material is used fo the efficient sealing. » BBCA Storex s side discharge system allows gravity load out to truck or rail cars. » BBCA Storex s temperature control system control system consists of temperarure sensors installed inside the cables to measure the grain temperature, and portable or stationary temperature screens. The temperature control system is connected with the PLC to allow for controlling the grain temperature inside the silos via the PLC screen.

ALTINBİLEK Pellet Presses are designed based on Quality, User Satisfaction, Environment and Nature Consciousness . Pellet Presses are machines which, after mixing the powdered raw materials or mixed powder products with steam and / or water in certain proportions enables it to be formed into pellets of various diameters (Ø1,6-22 mm) by mechanically compressing and passing through the perforated molds called discs with the help of roller-shaped pressure rollers. When used in the production of feed, Pellet Press prevents the decomposition that often occurs in the powder product depending on the transportation, storage, environmental conditions and the ability of the animals to choose; the prepared ration is maintained within the desired homogeneity balance, facilitates the digestion of the animals, thus increasing the desired yield from the animal. It enables the death of harmful microorganisms and increase hygiene due to the heat generated by the compression. The density of powder raw materials or products that are brought into pellet form is increasing. Compared to powdered products, the storage and transportation costs of pelleted products are reduced, losses are prevented, shelf life increases and becomes more economical under appropriate storage conditions. Pellet Presses have effective usage areas outside the feed industry. It is used to pellet raw materials and wastes such as bran, pulp, various grain husks, corn stalks, wood chips, garbage, organic fertilizers, hops and pomace.